Name: Forward AM Ultrafuse PLA Black | 1.75mm | 750g
Brand: martinafruit.com
SKU: 73402420957
Price: 20.00 USD
Availability: InStock
Rating: 4.2952 (18 reviews)

Forward AM Ultrafuse PLA Black | 1.75mm | 750g

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Forward AM Ultrafuse PLA Black | 1.75mm | 750gBlack PLA 0. 75kg. 1. 75mm diameter and approximately 90m long PLA is Poly Lactic Acid, a biodegradable polymer with a low melting point. It is an easy material to print with and Ultrafuse PLA gives a smooth printing result. This most used 3D printing material is available in a wide range of RAL and Ultrafuse colours and translucent variants. When properly cooled, PLA has a higher maximum printing speed, lower layer heights and sharper printed

and heat resistant up to 80°C

A Screwdriver for most screws on Ultimaker printers

reduced noise and a HD camera to monitor prints remotely

300 Tensile strength printed specimen x-y (+ 45°/-45°) MPa (N/mm²) 60 Tensile strength printed specimen x-y (0°) MPa (N/mm²) 80 Tensile strength printed specimen x-y (90°) MPa (N/mm²) 30 Tensile stress printed specimen x-y (0°) MPa (N/mm²) -- Elongation printed specimen (0°) % -- Flexural modulus printed specimen (+ 45°/-45°) GPa (kN/mm²) -- Impact strength printed specimen x-y (+ 45°/-45°)(Charpy) kJ/m² 135 Shore hardness --- -- Thermal properties

The material differs from F3 PA-CF Lite in higher tensile strength

Quick curing

wound dressing and orthopedic insoles

Toughness and Durability

the warranty will become invalidated if the product was at any time disassembled or reassembled by persons not authorised and confirmed by Photocentric to be qualified

Novamid® ID 1030-CF10 prints parts with properties close to what is usually achievable only by injection molding

And thanks to its size

Easy Printing Experience: The material is designed to print directly on glass beds without the need for additional adhesives

Exchange/Return Notes