Linear Ball Bearing - Square Flange EPKC50G 50mm Center Mount, Double Wide Open Linear Plain Bearing

Linear Ball Bearing - Square Flange EPKC50G 50mm Center Mount, Double Wide Open Linear Plain BearingSquare Flanged Linear Ball Bearing with a 50mm ISO Metric inner diameter, center mount and double wide design for higher cantilevered load capacity. The heat treated alloy steel shell ensures durability, while the resin retainer polymer cage minimizes noise and the low coefficient of friction enhances speed. Center Flange Mount and Double Size to handle more cantilevered loads Temperature Range: 4 +176F ( 20 +80C) Variant ID Sizes: From 1 4" to 2 Inch

Linear support rail and 1/2" diameter shaft

Sleeve bearing of 25mm ID

and a length of 8 inches

The inserted open-shell Simplicity® plain bearing can tilt slightly within the housing to compensate for up to 1/2° misalignment from centerline in all directions

Motor Mount

Double seals of standard Polymod material

The self-lubricating bearing liner is FrelonGOLD® which enables linear or rotational movement

Total of 4 Adjustable Frelon®J plugs secured with removable Loctite thread locker

Outer Diameter (OD) is 3/8"

Open Pillow Block Bearing featuring a Linear Ball Bearing with a 16mm ID (inner diameter) inside a housing made of aluminum alloy

Neither drilled nor tapped - pre-drilled shafts are NIPDM (metric) or NIPDL (inch)

4mm diameter