G04500 - SEMI G45 - Practice for Flash Characteristics of Thermosetting Molding Compounds StdTpc-FPD Masks The Specification of which data

The Specification of which data items are optional and which are required is not specified in this Document

the epitaxial layer must be of the same conductivity type as the substrate and should be at least twice as thick as the maximum depletion width in deep depletion to avoid errors caused by the proximity of the epitaxial interface (refer to ¶ 12

between equipment and the factory system in order to support seamless cascading of carriers for continuous processing of equipment in semiconductor fabrication systems or similar ones

SEMI E82-1106 (Reapproved 0523)

G04500 - SEMI G45 - Practice for Flash Characteristics of Thermosetting Molding Compounds StdTpc-FPD Masks The Specification of which dataThis specification defines a procedure for measuring the flashing characteristics of semiconductor grade transfer molding compounds. The flashing tendency for semiconductor grade molding compounds depends on the interaction of several variables, including mold conditions, process parameters, molding compound viscosity, and curing characteristics. This test is not a valid method for predicting the flashing performance in all mold types. It is a method